Specced for your wind zone the first time, this 4-inch round shaft saves you from re-engineering a base after the fixtures are up. The pole ships as a single steel piece with the base plate welded on, so it drops over the anchor bolts and levels in one operation. Wind-load ratings reach 160 km/h with published EPA capacities at each mounting height, letting you match the pole to your luminaire load without guesswork. A factory tenon accepts standard slip-fitter mounts and the grounded hand-hole with gasketed cover keeps the wiring serviceable, all in a clean black finish suited to commercial lots and walkways. We do not manufacture these poles; they are supplied through a trusted local partner, so confirm your height and wind zone and request a quote.

Match the pole to your wind zone up front and you skip costly base rework once luminaires go up on this 4-inch round shaft. Built as one welded steel piece, it sets over the anchor bolts and levels without field assembly. Ratings carry to 160 km/h, and EPA capacities are published at every mounting height so you can pair pole and luminaire load with confidence. The factory tenon takes standard slip-fitter mounts while a grounded hand-hole with gasketed cover keeps terminations sealed, finished in bronze for sites where a warmer architectural tone is specified. We do not manufacture these poles; a trusted local partner supplies them, so confirm your spec and request a quote.

When a site needs more fixture capacity at a given height, this 4-inch square shaft answers structurally, carrying higher EPA than a comparable round at the same mounting height. It ships as one welded steel piece, setting over the anchor bolts and leveling without field assembly. Ratings extend to 160 km/h with published EPA values at each height, and the flat faces simplify banner-arm and bracket attachment. A factory tenon and grounded hand-hole with gasketed cover keep mounting and wiring clean, all in a black finish for commercial and roadway sites. We do not manufacture these poles; they come from a trusted local partner, so confirm your EPA and wind zone and request a quote.

Need extra fixture capacity without going taller? This 4-inch square shaft holds more EPA than a comparable round at the same mounting height, making it the structural pick for loaded sites. One welded steel piece sets over the anchor bolts and levels without assembly in the field. Ratings run to 160 km/h with EPA published at every height, while flat faces ease banner-arm and bracket mounting. The factory tenon and gasketed grounded hand-hole keep installation tidy, here in a bronze finish for architectural exteriors. We do not manufacture these poles; a trusted local partner supplies them, so confirm your loading and request a quote.

Reaching taller mounting heights without sacrificing wind capacity is where this 5-inch round shaft earns its place, with EPA values published up to 30-foot mounts. The pole arrives as one welded steel piece that drops over the anchor bolts and levels in a single operation. Ratings hold to 160 km/h, so you can spec confidently for higher luminaires on open commercial sites. A factory tenon accepts standard slip-fitter mounts and the grounded hand-hole with gasketed cover keeps the wiring serviceable, finished in black for a clean standard match. We do not manufacture these poles; they are supplied by a trusted local partner, so confirm your height and wind zone and request a quote.

Taller poles and bigger luminaire loads call for more shaft, and this 5-inch round delivers it with EPA published up to 30-foot mounting heights. Built as a single welded steel piece, it sets over the anchor bolts and levels without field assembly. Wind ratings carry to 160 km/h, giving you margin on open and exposed commercial sites. The factory tenon takes standard slip-fitter mounts while a grounded hand-hole with gasketed cover keeps terminations sealed, here in a bronze finish for architectural specifications. We do not manufacture these poles; a trusted local partner supplies them, so confirm your spec and request a quote.

For the heaviest fixture loads on tall mounts, this 5-inch square shaft tops the range, with EPA values published all the way to 35-foot mounting heights. It ships as one welded steel piece that sets over the anchor bolts and levels without field assembly. Ratings reach 160 km/h, and the flat faces simplify banner-arm and multi-fixture bracket attachment on roadway and large commercial sites. A factory tenon and grounded hand-hole with gasketed cover keep mounting and wiring clean, finished in black. We do not manufacture these poles; they come from a trusted local partner, so confirm your EPA and wind zone and request a quote.

Maximum fixture capacity meets architectural finish in this 5-inch square shaft, the top of the range with EPA published to 35-foot mounting heights. One welded steel piece sets over the anchor bolts and levels without assembly in the field. Wind ratings run to 160 km/h, while flat faces ease banner-arm and multi-fixture bracket mounting on demanding sites. The factory tenon and gasketed grounded hand-hole keep installation tidy, here in a bronze finish for architectural exteriors. We do not manufacture these poles; a trusted local partner supplies them, so confirm your loading and request a quote.