The page your are looking for doesn't exists
× Checkout our new products belowBoxes, Covers and Extensions
Die-Cast Aluminum Weatherproof FS Junction Box | 18.3 cu.in
Our FS Weatherproof Box is a rugged, surface-mount metal box built to protect splices and device wiring in wet environments. Commonly used outdoors or anywhere moisture, dust, and debris are a concern, it provides a durable enclosure for a single-gang device or as a compact junction point.
Die-Cast Aluminum Weatherproof Octagonal Junction Box | 16 cu.in
Our FS weatherproof box is a waterproof metal box designed to protect electrical connections outdoors or in damp/dusty environments. Built in die-cast aluminum, it offers robustness, safety, and flexible installation for surface-mounted applications. With five 1/2" knockouts and 16 cu in of working space, it makes conduit entry and wiring layout straightforward in wet-location installs. cULus.
Vapour Barrier | 1 Gang
Made from transparent, durable material for clear installation visibility, it withstands a wide range of temperatures without cracking. Ideal for residential and commercial use, it installs quickly and provides a reliable seal around standard one-gang boxes. Designed to maintain insulated wall integrity, this vapour barrier fits 2” × 3” single-gang electrical boxes up to 3” deep.
54171-LSSAX - Steel Stud Mount Octagonal Box with Armored Cable Clamps 21 cu.in
Built for clean, reliable rough-ins on metal studs, this 4" square galvanized steel electrical box gives you a solid mounting point for fixtures or general junction work.
OBEX - Octagonal Extension for Drywall 5 cu.in
A 4-inch octagon box set too deep behind drywall becomes a code problem fast, and this shallow galvanized steel extender solves it without opening the wall. It brings the recessed box flush with the finished surface so devices and fixtures mount square and the gap that inspectors flag disappears. At half an inch deep it adds just enough reach without stealing device room, and it fastens straight to the existing box in seconds. cETL certification confirms the fix meets code. For a recessed box discovered after the drywall is up, it is the quickest path back to a compliant, finished install.
55171-K - Octagonal Extension Ring 21 cu.in
Running out of room in an existing 4-inch octagon box no longer means tearing it out. This deep galvanized steel extension ring stacks directly on top and adds 21 cubic inches of usable volume for extra conductors, splices or a fixture change. Concentric 1/2 and 3/4 inch knockouts open only the entries you need, and the steel body seats cleanly on the box below. cETL certification keeps the addition inspection-ready. When a box is overfilled and a device still has to go in, it turns a rework headache into a two-minute fix.
777-LRB - Steel Device Box | 1-Gang | Rework | With Knockouts | 11 cu.in.
The ED-NGB-777-LRB is a 1-Gang steel electrical box designed for rework (old work) installations. It features pivoting mounting ears that secure directly to existing drywall or finished walls. This box includes a pre-installed Loomex clamp, one bottom knockout, and four side pryouts for flexible wire entry. With a compact 11 cubic inch volume, it supports standard electrical devices in retrofit applications. Non-gangable and compatible with wall thicknesses up to 1-1/8 inch.
MBD-1K - Deep Box for Concrete with Knockouts 21 cu. in
Rough-in through concrete and block gets far simpler with a box built for the job. Galvanized steel stands up to the pressure of a masonry pour while 21 cubic inches of depth leaves ample room for conductors and connections. Fourteen concentric knockouts accept 1/2, 3/4 and 1 inch conduit, so feeds land from whatever angle the wall allows without hunting for the right entry. The single-gang body sets devices flush in poured or block walls, and cETL certification backs the install at inspection. It is the difference between fighting a shallow box in masonry and dropping in one that fits the first time.
2004-LH - Large Device Box with NMD Clamps 18.5 cu. in
Bulky thermostats and low-voltage controls finally get the room they need. This extra-deep galvanized steel device box delivers 18.5 cubic inches of usable volume in a non-gangable single-gang design, so crowded conductors and oversized devices seat cleanly without a fight. Integrated clamps for nonmetallic sheathed cable let you land wire without add-on connectors, and the nail-on design drives straight into wood studs during new-work rough-in. cETL certification keeps inspections moving. On thermostat and device drops where standard-depth boxes come up short, it means a faster, cleaner install.
8362 - 1 Gang 4’’ Square Receptacle Box Cover 4.6 cu.in
Turning a 4x4 square box into a finished single-device outlet takes one part with this galvanized steel cover. It centers a decorator-style opening over the box so a switch, receptacle or GFCI mounts square and sits flush behind the wall plate. The rugged steel holds its shape and keeps the opening square for a clean, gap-free finish. cETL certification keeps the assembly inspection-ready. On any 4x4 rough-in that needs a single decorator device, it is the fast, tidy way to close it out.
8369 - 2 Gang 4’’ Square Receptacle Box Cover 4.6 cu.in
Two decorator-style devices can share a single 4x4 box when this galvanized steel cover does the adapting. It positions a pair of decorator openings side by side so switches, receptacles or a switch-and-GFCI combo mount square and finish flush under the plate. Rugged steel keeps both openings aligned for a gap-free look. cETL certification backs the install at inspection. Where a 4x4 has to serve two decorator devices, it closes out the opening in one clean step.
SLK-4 - 4 Gang Plastic Extension Ring
Arani's plastic box extension ring is designed to enhance the functionality and safety of your electrical installations. Crafted from premium polycarbonate/nylon materials, these extension rings offer exceptional durability and reliability, ensuring long-lasting performance in various environments. The extension ring provides a secure and versatile solution for expanding electrical box capacity, making it ideal for accommodating additional wiring connections, switches, outlets, or other electrical components.
Disconnects & Safety Switches
AC Disconnect | 60A | Non-Fused
Fast, clean power isolation at the condenser starts with the right disconnect — one that won't send you hunting for fuse cartridges mid-job. The ACD60A handles isolation through the pull-out mechanism alone, relying on the panel breaker for overcurrent protection, exactly as NEC Article 440 intends for this application. The Type 3R galvanized steel enclosure is rated for wet locations, so it stands up to whatever the outdoor install throws at it — rain, sleet, and direct exposure — without compromise. Six knockouts in ½", ¾", and 1" sizes give you the conduit entry flexibility to land the job cleanly regardless of your approach. Rated for both residential and light commercial work, and cULus listed to keep inspectors satisfied.
Fittings, Connectors and EMT Straps
Steel Locknut 1/2" | Bag of 10
Ground continuity at every box termination is non-negotiable — and this 1/2" steel locknut makes sure it happens. Designed to thread directly onto connectors and conduit fittings, it bites tight against the knockout to create a solid metallic bond that satisfies code from residential roughing to commercial panel work. The cULus listing backs every installation with confidence, and the all-steel construction at 3.35 mm profile holds secure without crowding adjacent hardware. At the 1/2" trade size, it covers the most common conduit run on the job. Keep a full supply in the bag and you'll never stall a termination waiting on a locknut.
Steel Locknut 3/4" | Bag of 10
The 3/4" trade size is the workhorse of the conduit world, and this cULus-listed steel locknut is built to match its pace. Thread it onto any 3/4" connector or fitting, tighten it firm against the knockout, and you have a metallic connection that grounds reliably and stays put through vibration and thermal cycling. All-steel construction keeps ground continuity intact in residential, commercial, and industrial applications, while the 3.35 mm profile fits neatly within congested box entries. Whether you're terminating a handful of runs or a whole wall of panels, this is the steel locknut you reach for at 3/4".
Steel Locknut 1" | Bag of 10
Moving up to 1" conduit means more current-carrying capacity — and the locknut securing it needs to be equally dependable. This cULus-listed 1" steel locknut threads firmly onto connectors and conduit fittings to lock down ground continuity at every box entry on commercial and industrial jobs. The solid steel construction resists loosening under vibration and maintains the metallic bond that inspectors expect. At 3.35 mm profile, it seats cleanly at the knockout without interfering with adjacent hardware or cover plates. For electrical contractors running heavier conduit systems, this steel locknut is a straightforward, cULus-backed solution that removes one variable from the inspection checklist.
Steel Locknut 1-1/4" | Bag of 4
Larger conduit systems demand hardware that keeps up — and this cULus-listed 1-1/4" steel locknut delivers the metallic ground connection required at every box entry. It threads directly onto 1-1/4" connectors and conduit fittings, locking tight against the knockout to establish the ground continuity path that both code and safety require. Built entirely from steel at a 3.35 mm profile, it handles the demands of commercial and industrial installations without added bulk. Suitable for damp locations and applicable in residential, commercial, and industrial settings, it's the dependable steel locknut choice when running larger feeder conduit to panels and sub-panels.
Steel Locknut 1-1/2" | Bag of 4
For the heavy conduit runs feeding large panels and distribution boards, every fitting has to hold and every ground path has to be solid. This cULus-listed 1-1/2" steel locknut is engineered exactly for that role — threading firmly onto 1-1/2" conduit fittings and connectors to lock down the metallic bond that ground continuity codes require. The steel construction at 3.35 mm profile provides the structural integrity to stay tight even in high-vibration mechanical environments. Suitable for damp locations and applicable in residential, commercial, and industrial settings, it eliminates doubt at each knockout entry and keeps inspections moving forward.
Steel Locknut 2" | Bag of 2
At 2", you're running the kind of conduit that carries serious current — and the hardware securing it needs to match. This cULus-listed 2" steel locknut is built for the heavy end of commercial and industrial electrical work, where solid ground continuity at every large knockout entry is a code requirement, not an option. It threads directly onto 2" connectors and conduit fittings, gripping tight against the box wall to establish the robust metallic bond that inspectors look for on service entrances, motor feeds, and main distribution panels. The all-steel construction holds steady through vibration, temperature swings, and the mechanical stress that comes with large installations.
Plastic Bushing 1/2" | Bag of 10
Wire insulation doesn't protect itself from the sharp threads of a metal conduit end — that's exactly what this plastic bushing is designed for. Rated cULus and approved for wet locations, it threads onto the exposed end of 1/2" EMT, RMC, or IMC to create a smooth, insulating transition that shields conductors from abrasion during pull-through and over the life of the installation. Made from polycarbonate for long-term resistance to moisture and UV, it holds up in exposed outdoor terminations and damp interior conduit runs. At just 2–5 g, it adds nothing to the box while adding every bit of protection the code demands.
Plastic Bushing 3/4" | Bag of 6
The 3/4" plastic bushing is one of those small fittings that prevents big problems — and this cULus-listed version is the right choice for any conduit termination that demands both code compliance and long-term durability. It threads smoothly onto the end of 3/4" EMT, RMC, or IMC, wrapping the sharp threads in a smooth insulating ring that protects conductor insulation from abrasion during pull-in and throughout the service life of the installation. Wet-location rated and built from polycarbonate for lasting environmental resistance, it's equally at home in mechanical rooms, underground conduit entries, and outdoor surface-mount terminations.
Plastic Bushing 1" | Bag of 4
Moving to 1" conduit typically means heavier conductors — conductors whose insulation needs reliable protection at every threaded termination. This cULus-listed plastic bushing threads onto the end of 1" EMT, RMC, or IMC to create a smooth insulating ring that eliminates the abrasion risk at the conduit mouth during pull-in and over time. Wet-location rated and built from polycarbonate for long-term environmental resistance, it performs reliably in commercial and industrial installations where conduit entries face moisture, temperature variation, and physical stress.
Plastic Bushing 1-1/4" | Bag of 2
At 1-1/4" trade size, the conduit is typically handling feeders and branch circuits in commercial and industrial environments — which makes conductor protection at the conduit end all the more important. This cULus-listed plastic bushing threads onto 1-1/4" EMT, RMC, or IMC to provide the smooth insulating ring that protects conductors from thread-edge abrasion during installation and long after. Wet-location rated and built from durable polycarbonate, it holds up in mechanical rooms, industrial conduit entries, and outdoor surface-mounted conduit runs without degrading.
Plastic Bushing 1-1/2" | Bag of 2
Heavier-gauge conductors pulled through 1-1/2" conduit carry more current and hold more value — and protecting their insulation at every threaded termination is a code requirement with real consequences if skipped. This cULus-listed plastic bushing threads onto 1-1/2" EMT, RMC, or IMC to deliver a smooth insulating ring at the conduit mouth, keeping every conductor protected from thread-edge abrasion during and after pull-through. Wet-location rated and polycarbonate-built for lasting resistance to moisture and temperature variation, it's equally suited to industrial panel feeds, outdoor surface conduit, and below-grade conduit entries.
Plastic Bushing 2" | Bag of 2
At 2", you're terminating conduit that carries the highest current loads in the system — service entrances, large motor feeds, and main distribution runs where conductor protection at the conduit end is both code-required and critical in practice. This cULus-listed plastic bushing threads onto the end of 2" EMT, RMC, or IMC to create the smooth insulating ring that shields heavy conductors from thread edges. Wet-location rated for outdoor and damp installations, the polycarbonate construction resists moisture and UV degradation. Featherlight at just 2–5 g, it installs in seconds and adds zero complexity to the rough-in.
Zinc Conduit Nipple 1/2" | Bag of 2
When two enclosures or junction boxes need to connect back-to-back through a wall or partition, a zinc conduit nipple is the right tool — and this one delivers a clean, code-compliant solution for rigid IMC applications. Cast from zinc die for dimensional accuracy and durable thread engagement, this cULus-listed 1/2" zinc conduit nipple creates a concentric, flush-fitting connection that keeps conduit runs aligned and watertight in damp-rated environments. The zinc die-cast body resists corrosion while maintaining the thread integrity required for secure IMC terminations. Suitable for residential, commercial, and industrial installations, it fits back-to-back box mounting, wall-fed entry points, and through-block conduit runs without modification.
Zinc Conduit Nipple 3/4" | Bag of 2
The 3/4" zinc conduit nipple is the go-to fitting for back-to-back junction box connections on standard commercial IMC runs — and this zinc die-cast version is built with the precision and durability that trade work demands. Rated cULus and engineered for rigid IMC conduit, it delivers a concentric, flush connection between two enclosures that holds alignment and keeps the run code-compliant in damp-rated installations. The zinc die-cast construction maintains tight thread tolerance and resists the corrosion that comes with mechanical room and exterior-adjacent applications. At 3/4" trade size, it serves the most common IMC runs in commercial work.
LED Lighting
Slim Panel 3" | 5CCT Variable | 440 Lumens | Round | Black | V4
Our 3-inch LED recessed downlight delivers 440 lumens at just 5W with smooth TRIAC dimming and a wide 110° beam. Featuring selectable color temperatures, an aluminum body, and damp-location rating, it’s a reliable and efficient choice for residential and commercial lighting.
Slim Panel 3" | 5CCT Variable | 440 Lumens | Round | White | V4
Our 3-inch LED recessed downlight delivers 440 lumens at just 5W with smooth TRIAC dimming and a wide 110° beam. Featuring selectable color temperatures, an aluminum body, and damp-location rating, it’s a reliable and efficient choice for residential and commercial lighting.
Track Light LED Head | 15W | 5CCT | Adjustable Beam | Black | V1
The TL-15W-VAR-BK-AD-V1 is a premium LED track head designed for ultimate flexibility in directional lighting. With a 15W output equivalent to 90W halogen, it delivers up to 1,150 lumens with an adjustable beam angle of 20° to 50°, making it ideal for accent or general lighting. Users can select from five color temperatures (2700K to 5000K) via integrated CCT tuning. The fixture offers high color rendering (CRI >90), low glare (UGR 0.9.
2FT Track | Black | V1
Add versatility to your lighting projects with Arani's 2-foot LED track TL-2FT-BK-V1 — a durable and stylish solution designed for track installations. Its aluminum housing and slim profile blend seamlessly into both residential and commercial spaces. Compatible with HALO connectors, this track provides safe 120 V power, with a maximum current capacity of 16 A and a total power of 1,920 W. The product comes with finishing end caps installed on both ends, ensuring a clean and professional appearance.
4FT Track | Black | V1
Add versatility to your lighting projects with Arani's 4-foot LED track TL-4FT-BK-V1 — a durable and stylish solution designed for track installations. Its aluminum housing and slim profile blend seamlessly into both residential and commercial spaces. Compatible with HALO connectors, this track provides safe 120 V power, with a maximum current capacity of 16 A and a total power of 1,920 W. The product comes with finishing end caps installed on both ends, ensuring a clean and professional appearance.
6FT Track | Black | V1
Add versatility to your lighting projects with Arani's 6-foot LED track TL-6FT-BK-V1 — a durable and stylish solution designed for track installations. Its aluminum housing and slim profile blend seamlessly into both residential and commercial spaces. Compatible with HALO connectors, this track provides safe 120 V power, with a maximum current capacity of 16 A and a total power of 1,920 W. The product comes with finishing end caps installed on both ends, ensuring a clean and professional appearance.
8FT Track | Black | V1
Add versatility to your lighting projects with Arani's 8-foot LED track TL-8FT-BK-V1 — a durable and stylish solution designed for track installations. Its aluminum housing and slim profile blend seamlessly into both residential and commercial spaces. Compatible with HALO connectors, this track provides safe 120 V power, with a maximum current capacity of 16 A and a total power of 1,920 W. The product comes with finishing end caps installed on both ends, ensuring a clean and professional appearance.
Track Mini-Joiner | Black | V1
The TL-C-MJ-BK-V1 Mini Joiner allows you to seamlessly connect two sections of Arani LED track lighting. With its compact and low-profile design, it creates continuous electrical and structural connections between segments while maintaining a clean look. Ideal for tight spaces or minimalist installations, the black finish blends with most ceiling environments. It's HALO-compatible and requires no tools for installation, making it a reliable accessory for both residential and commercial projects.
Track L-Connector | Black | V1
The TL-C-L-BK-V1 L-Connector allows you to create 90-degree right-angle turns in your LED track lighting layout. Whether you're designing around corners or shaping perimeter lighting, this component ensures both electrical continuity and structural support. Featuring a sleek black finish and tool-free installation, it integrates seamlessly with HALO-compatible tracks, making it ideal for commercial or residential ceiling layouts that demand precision and flexibility.
Track T-Connector | Black | V1
The TL-C-T-BK-V1 T-Connector is designed to split your LED track system into three directions, allowing you to create complex layouts in retail, gallery, and office environments. This component maintains electrical continuity across all three paths while providing a clean, professional junction. With a sleek black finish, tool-free assembly, and HALO compatibility, it offers the flexibility to adapt to custom lighting designs that go beyond straight lines and corners.
Track Cannopy | Black | V1
The TL-CAN-BK-V1 Floating Canopy is a ceiling-mounted power feed solution for LED track lighting systems. Designed for installations where wiring enters from above, the canopy allows for a central, overhead power source while maintaining a clean, professional appearance. This accessory is compatible with HALO-type track systems and supports 120V electrical input. It features a black finish and installs quickly with minimal tools, making it ideal for both new builds and retrofit lighting applications in residential or commercial spaces.
Track Live End Feeder | Black | V1
The TL-C-LE-BK-V1 Live End Connector serves as the entry point for electrical power in Arani's LED track lighting systems. It connects the power supply to the rail at one end, providing a reliable and efficient feed. Featuring a clean black finish and a HALO-compatible interface, this live end connector supports 120V input and ensures safe, code-compliant installation in both residential and commercial projects. It installs easily with a tool-free snap-in mechanism, making it ideal for contractors and DIY users alike.
LED Tape Light | 24V | 2700K-5000K Tunable | 4.5W/ft | 16 ft Roll | Weatherproof | Dimmable
This 24V weatherproof LED tape light offers tunable white from 2700K to 5000K, controlled by remote or fixed via CW/WW wiring. Rated IP67 for outdoor and wet-location use. Ideal for façade accents, soffits, deck lighting, garden paths, and architectural coves where color temperature flexibility matters. Rated cULus, compatible with Arani aluminum extrusion profiles. Key Specs: 200 lm/ft │ 80 lm/W efficacy 4.5W/ft │ 72W total (16 ft roll) 2700K-5000K tunable │ CRI 90+ 24Vdc input │ Dimmable IP67 │ Wet locations Min. cut every 2 in. │ Max. run 32 ft LED density: 72 LEDs/ft │ Beam angle: 120° Operating temp: -20°C to 60°C Rated life: 50,000 hrs │ 3-year warranty Included in the box: 1x LED roll (16 ft) 10x mounting brackets 2x solderless 2-wire connectors 4x end caps Power supply and remote sold separately.
LED tape light | 24V | 2700K-5000K tunable | 4.5W/ft | Weatherproof | Dimmable | By inch
This 24V weatherproof LED tape light is sold by the inch, making it ideal for custom-length outdoor projects. Offers tunable white from 2700K to 5000K, controlled by remote or fixed via CW/WW wiring. Rated IP67 for wet-location use, with an adhesive backing for tool-free surface mounting. Compatible with Arani aluminum extrusion profiles. Rated cULus. Key Specs: 200 lm/ft │ 80 lm/W efficacy 4.5W/ft │ 72W total (16 ft roll) 2700K-5000K tunable │ CRI 90+ 24Vdc input │ Dimmable IP67 │ Wet locations Min. cut every 2 in. │ Max. run 32 ft LED density: 72 LEDs/ft │ Beam angle: 120° Operating temp: -20°C to 60°C Rated life: 50,000 hrs │ 3-year warranty Power supply and remote sold separately. Sold by the inch.
LED Shoebox/Flood | CCT & Wattage Variable | Dimmable | 60-80-100W | 15000 Max lumens | 120-347V
The SH-60W-100W-VAR-V6 LED Shoebox Flood Light is engineered to deliver high-performance illumination with advanced lighting control and powerful, flexible output. Offering selectable wattage (60W, 80W, or 100W) this fixture produces up to 15,000 lumens. Designed for customization, it features selectable colour temperatures (3000K/4000K/5000K), allowing you to tailor the visual environment to the needs of any site.
LED Shoebox/Flood | CCT & Wattage Variable | Dimmable | 150-175-200W | 30000 Max lumens | 120-347V
The SH-150W-200W-VAR-V6 LED Shoebox Flood Light is engineered to deliver high-performance illumination with advanced lighting control and powerful, flexible output. Offering selectable wattage (150W, 175W, or 200W), this fixture produces up to 30,000 lumens. Designed for customization, it features selectable colour temperatures (3000K/4000K/5000K), allowing you to tailor the visual environment to the needs of any site.
LED Shoebox/Flood | CCT & Wattage Variable | Dimmable | 200-240-300W | 45000 Max lumens | 120-347V
The SH-200W-300W-VAR-V6 LED Shoebox Flood Light is engineered to deliver high-performance illumination with advanced lighting control and robust, flexible output. Offering selectable wattage (200W, 240W, or 300W), this fixture produces up to 45,000 lumens, making it a powerful upgrade for large outdoor areas. Designed for customization, it features selectable colour temperatures (3000K / 4000K / 5000K), allowing you to tailor the visual environment to the needs of any site.
24V DC Electronic Transformer (192W) Hard Wire With Junction Box V3
At the top of the hardwire driver range at 192W, this unit delivers two independent 24Vdc/4A outputs from a single Class 2 Type HL listed enclosure — making it the go-to choice for large-scale architectural strip installations, signage, or multi-zone commercial lighting where maximum run length and load capacity are the priority. At 92% efficiency it produces the least heat per watt in the lineup, and the ≥0.95 power factor keeps the upstream circuit clean. All five dimming protocols are built in, and the full-protection aluminum enclosure with ten half-inch knockouts and automatic hiccup recovery handles any fault condition without manual intervention. cULus E362082 listed, RoHS and SELV compliant, three-year warranty.
Controller | RF - WIFI - Bluetooth | 12-24V
Eliminating the need to stock separate controllers for different strip types, this 5-in-1 LED controller drives single-colour, CCT, RGB, RGBW, and RGB+CCT strips up to 360W at 12–24Vdc — all from one unit that fits any standard installation. Triple connectivity — RF remote to 30m, Bluetooth, and Wi-Fi via the Smart Life app — means the system is app-ready from day one, so installers hand off a smart lighting setup without any additional commissioning hardware. The included remote, AAA batteries, and wall bracket mean nothing extra to source; everything needed for a complete install ships in the bag. With smooth 0–100% dimming, RoHS compliance, and a two-year warranty, it is a clean upgrade from single-protocol controllers on any residential or light commercial strip project.
Circular 7" Ceiling Light | White | 5CCT Variable | 8-10-12W 1200 Lumens | V5
The 7-inch slim LED downlight gives electricians a single SKU that covers most low-profile ceiling jobs. Five color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) and three power levels (8W, 10W, 12W) are selectable directly on the fixture, so one stocked unit replaces five. Output ranges from 800 to 1200 lumens at 100 lm/W with a 90+ CRI and a 110° beam, suitable for kitchens, hallways, and laundry rooms. The 11/16-inch profile, plastic body, and polycarbonate lens keep installation clean in tight ceiling cavities. Triac dimming, 1 kV surge protection on both L-N and L/N-PE, and damp-location rating cover most residential and light commercial use cases. cETLus listed under file 5000999, backed by a 5-year warranty and 35,000-hour rated life.
12V DC Electronic Transformer (120W) Hard Wire With Junction Box V3
Delivering 120W through two independent 12Vdc/5A outputs while holding a Class 2 Type HL listing, this hardwire driver is built for larger 12V installations — display cases, architectural coves, or multi-zone strip layouts — where high wattage and code-compliant Class 2 wiring are both required. Five-in-1 dimming (TRIAC, 0-10V, 1-10V, PWM, RX) covers every common control scenario, and the full-protection aluminum enclosure with eight half-inch knockouts, SCP, OVP, OTP, and OLP integrates cleanly into standard commercial electrical enclosures. At 90.5% efficiency and ≥0.95 power factor, it draws less than 1.3A from a 120Vac branch circuit at full load. cULus E362082 listed, three-year warranty.
24V DC Electronic Transformer (96W) Hard Wire With Junction Box V3
Stepping up to 96W while maintaining a Class 2 Type HL listing, this 24Vdc hardwire driver handles larger architectural LED installations that a 60W unit cannot cover — without requiring a Class 1 installation approach. At 91% efficiency and a power factor of ≥0.95, it runs cool and draws cleanly from the 100–277Vac supply, with all five dimming modes — TRIAC, 0-10V, 1-10V, PWM, and RX — already on board. The full-protection aluminum case with automatic hiccup recovery and 8 half-inch knockouts adapts to most enclosure and conduit configurations on commercial jobsites. cULus listed, RoHS and SELV compliant, backed by a three-year warranty.
24V DC Electronic Transformer (60W) Hard Wire With Junction Box V3
Built to Class 2 and Type HL standards and cULus listed for dry, damp, and wet locations, this 60W hardwire driver covers 24Vdc constant-voltage installations with full five-protocol dimming support — TRIAC, 0-10V, 1-10V, PWM, and RX — in a single unit. The full-protection aluminum enclosure includes SCP, OVP, OTP, and OLP with automatic hiccup recovery, so the driver self-resets after a fault rather than requiring on-site service. At 24Vdc/2.5A, it is optimally sized for mid-run commercial strip installations on 24V systems — the preferred voltage for longer LED tape runs where voltage drop is a concern. Backed by a three-year warranty and rated for any location type.
12V DC Electronic Transformer (60W) Hard Wire With Junction Box V3
Built to Class 2 and Type HL standards and cULus listed for dry, damp, and wet locations, this 60W hardwire driver is engineered for commercial and industrial LED installations where protection and reliability are non-negotiable. All five dimming protocols — TRIAC, 0-10V, 1-10V, PWM, and RX — are supported on a single unit, so there is no need to stock separate drivers for different control systems on the same project. A full-protection aluminum enclosure with SCP, OVP, OTP, and OLP guards the load from fault conditions, with automatic hiccup recovery that self-resets without a service call. At 12Vdc and 5A continuous output, this driver is sized for compact constant-voltage strip and fixture runs up to 60W, backed by a three-year warranty.
Track End Caps | Black | V1
The TL-EC-CL-BK-V1 End Cap is a finishing accessory designed for Arani's LED track lighting systems. It neatly closes off the end of a 4FT track or any compatible segment, offering a clean, professional appearance and protecting internal connections. Its low-profile black finish complements modern interiors and ensures safety by covering exposed track terminations. Ideal for both residential and commercial installations.
Tools
Adjustable Tongue-And-Groove Pliers | 10"
Our 10" adjustable groove joint pliers are designed for high-performance gripping and fastening in plumbing, mechanical, and industrial applications. Made in Germany and manufactured from special chrome vanadium steel with a grey atramentized finish, they deliver strength, durability, and corrosion resistance. The push-button adjustment mechanism allows fast, precise positioning directly on the workpiece. With 25 adjustment positions, the pliers provide flexible, secure fitment with no risk of unintentional shifting. An optimized serration pattern positioned near the joint ensures exceptional grip under heavy load. The precision-engineered jaw design enhances self-locking performance for secure handling of round and flat materials.
Cutting Pliers | 7"
Our 7" diagonal cutting pliers are built for clean, consistent cutting performance in electrical, mechanical, and general-purpose applications. Made in Germany and manufactured from durable carbon steel, they ensure strength and long service life. Designed to cut both soft and hard wire, these pliers deliver reliable performance across a wide range of materials. The ultra-precise cutting edges provide clean, accurate cuts with a rated capacity for hard wire up to Ø 2.5 mm (3/32").
Gripping Pliers | 8"
Our 8" long nose pliers are engineered for precision gripping, bending, and cutting in electrical and industrial applications. Made in Germany and manufactured from special high-grade carbon steel, they provide durability and long-term performance in demanding environments. The slim, straight half-round jaws ensure exceptional reach and precise control, making them ideal for detailed work and confined spaces. The integrated cutter delivers clean, effortless cuts with a rated capacity for hard wire up to Ø 1.8 mm (1/16").
Gripping Pliers | 6-1/4"
Our 6-1/4" long nose pliers are designed for precision gripping, bending, and cutting in electrical, mechanical, and general-purpose applications. Made in Germany and manufactured from high-grade carbon steel, they ensure durability and long service life. The slim, straight half-round jaws provide exceptional reach and accurate control in confined or hard-to-access areas. An integrated cutter delivers clean, effortless cuts with a rated capacity of hard wire up to Ø 1.6 mm (1/16").
Lineman's Pliers | 9"
Our 9" lineman's pliers are engineered for demanding electrical and industrial applications. Made in Germany and manufactured from special high-grade carbon steel, they deliver durability, precision, and long-term performance in heavy-duty environments. The extra-long, ultra-sharp cutting edges are optimized for effortless precision cutting, particularly on flat cables. The aggressive serrated jaws ensure maximum gripping strength, while the integrated 4-point vice-grip pipe feature provides a secure, slip-resistant hold on pipes and round materials. The power-joint design reduces hand effort by up to 30%, increasing efficiency and minimizing fatigue during extended use. An additional gripping zone beneath the joint enhances versatility and control in tight or awkward spaces.
Wiring Devices and Accessories
8421-SS - Duplex Cover Plate | Stainless Steel | 1 Gang
This 1-gang duplex cover plate is made from durable stainless steel for long-term performance and a clean, modern appearance. Designed to fit standard duplex electrical outlets, it provides a precise, secure fit while protecting wall openings from wear and impact. The corrosion-resistant finish makes it suitable for residential, commercial, and light industrial environments where durability and a professional look are required. Compatible with standard mounting hardware and electrical boxes.
Sliding Dimmer (200W) | 3 Way | White | V3
Our 120V triac dimmer switch delivers smooth, reliable lighting control for residential and light commercial applications. Rated up to 200W, it supports both 1-way and 3-way configurations and offers improved power handling in a compact design. Ideal for LED lighting, it ensures consistent dimming performance with modern installations.
Sliding Dimmer (200W) | 3 Way | Black | V3
Our 120V triac dimmer switch delivers smooth, reliable lighting control for residential and light commercial applications. Rated up to 200W, it supports both 1-way and 3-way configurations and offers improved power handling in a compact design. Ideal for LED lighting, it ensures consistent dimming performance with modern installations.